EnoughToGet CalculatorsGuides

Concrete & masonry

Reo mesh calculator

Reinforcing mesh for a slab: how many sheets of SL62, SL72 or SL82 mesh, and how many bar chairs hold it off the ground.

Try itReo mesh: enter your own sizes
m
Type metres, for example 6.5.
m
The slab design names the mesh. All three come as 6.0 × 2.4 m sheets.
You need
2 sheets
54 bar chairs

Shopping list

ItemBuyNote
SL72 mesh sheets2 sheets41 kg each, 82 kg in all
Bar chairs54 chairs800 mm grid
  • A sheet is 6.0 × 2.4 m but laps cost length: this counts the 13.92 m² effective area. Lap length is about 225 mm (Marshall Steel; other guides quote longer laps): your engineer's drawing gives the figure.
  • Bar chairs at no more than 800 mm centres (NCC 2019 Volume Two). Concrete cover: 50 mm bottom and 40 mm top for a slab on ground (Cement Australia).
How this was worked out
  1. Slab area: length × width
    6 × 4 = 24 m²
  2. Effective sheet area: effective length × effective width
    5.8 × 2.4 = 13.92 m²
  3. Sheets: area ÷ effective sheet area, rounded up
    24.00 ÷ 13.92 = 1.72 sheets
  4. Bar chairs: (length ÷ spacing, rounded up, + 1) × (width ÷ spacing, rounded up, + 1)
    (ceil(6 ÷ 0.8) + 1) × (ceil(4 ÷ 0.8) + 1) = 54 chairs

Reo mesh needed by size

Slab (m)Main resultShopping list
3 × 31 sheet1 sheet SL72 mesh sheets; 25 chair Bar chairs
4 × 31 sheet1 sheet SL72 mesh sheets; 30 chair Bar chairs
6 × 42 sheet2 sheet SL72 mesh sheets; 54 chair Bar chairs
8 × 53 sheet3 sheet SL72 mesh sheets; 88 chair Bar chairs
10 × 65 sheet5 sheet SL72 mesh sheets; 126 chair Bar chairs

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Slab area: length × width
    6 × 4 = 24 m²
  2. Effective sheet area: effective length × effective width
    5.8 × 2.4 = 13.92 m²
  3. Sheets: area ÷ effective sheet area, rounded up
    24.00 ÷ 13.92 = 1.72 sheets
  4. Bar chairs: (length ÷ spacing, rounded up, + 1) × (width ÷ spacing, rounded up, + 1)
    (ceil(6 ÷ 0.8) + 1) × (ceil(4 ÷ 0.8) + 1) = 54 chairs

What to enter

FieldUnitHelp
Slab lengthmType metres, for example 6.5.
Slab widthm
Mesh typechooseThe slab design names the mesh. All three come as 6.0 × 2.4 m sheets.

Before you buy

Frequently asked questions

How do I calculate reo mesh?

Reinforcing mesh for a slab: how many sheets of SL62, SL72 or SL82 mesh, and how many bar chairs hold it off the ground. Enter your sizes in the calculator. It works out slab area (length × width) and the later steps, then rounds up to whole packs.

Where does the concrete mesh effective length figure come from?

5.8 m. InfraBuild ribbed square mesh page: SL72 and SL82 effective area 5.8 x 2.4 m. Checked against its source on 2026-11-18.

Where does the concrete mesh effective width figure come from?

2.4 m. InfraBuild ribbed square mesh page: SL72 and SL82 effective area 5.8 x 2.4 m. Checked against its source on 2026-11-18.

Where does the reo sl62 mass figure come from?

33 kg/sheet. Ausreo reinforcing mesh page: SL62 sheet, 33 kg, 5.8 x 2.4 m effective. Checked against its source on 2026-11-18.

Where does the concrete mesh sl72 mass figure come from?

41 kg/sheet. InfraBuild ribbed square mesh page: SL72 mass per sheet 41 kg (6.75 mm wires at 200 mm). Checked against its source on 2026-11-18.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

Guides for this calculator

Related calculators