Framing & insulation
Wall framing calculator
Timber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Studs, 2.4 m long | 13 studs | 600 mm centres |
| Top and bottom plate | 12 m | single top plate; allow for lengths and cuts |
| Noggins | 11 noggins | 1 row between studs |
- Stud centres and noggin spacing here are common defaults (Bunnings and timber suppliers cite AS 1684). Framing size, spacing and bracing for a real wall come from your design.
How this was worked out
- Bays:
wall length ÷ stud centres, rounded up
6000 ÷ 600 = 10 bays - Studs:
(bays + 1 + extra studs) × (1 + waste), rounded up
(10 + 1 + 0) × 1.10 = 12.1 studs - Plates:
wall length × (top plates + 1 bottom plate)
6 × 2 = 12 m - Noggin rows:
wall height ÷ maximum noggin gap, rounded up, − 1
2400 ÷ 1350 = 1 rows - Noggins:
rows × bays × (1 + waste), rounded up
1 × 10 × 1.10 = 11 noggins
Wall framing needed by size
| Wall length (m) | Main result | Shopping list |
|---|---|---|
| 3 | 7 stud | 7 stud Studs, 2.4 m long; 6 m Top and bottom plate; 6 noggin Noggins |
| 4.5 | 10 stud | 10 stud Studs, 2.4 m long; 9 m Top and bottom plate; 9 noggin Noggins |
| 6 | 13 stud | 13 stud Studs, 2.4 m long; 12 m Top and bottom plate; 11 noggin Noggins |
| 9 | 18 stud | 18 stud Studs, 2.4 m long; 18 m Top and bottom plate; 17 noggin Noggins |
| 12 | 24 stud | 24 stud Studs, 2.4 m long; 24 m Top and bottom plate; 22 noggin Noggins |
Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.
How it is calculated
- Bays:
wall length ÷ stud centres, rounded up
6000 ÷ 600 = 10 bays - Studs:
(bays + 1 + extra studs) × (1 + waste), rounded up
(10 + 1 + 0) × 1.10 = 12.1 studs - Plates:
wall length × (top plates + 1 bottom plate)
6 × 2 = 12 m - Noggin rows:
wall height ÷ maximum noggin gap, rounded up, − 1
2400 ÷ 1350 = 1 rows - Noggins:
rows × bays × (1 + waste), rounded up
1 × 10 × 1.10 = 11 noggins
What to enter
| Field | Unit | Help |
|---|---|---|
| Wall length | m | Type metres, for example 6.3. |
| Wall height | m | Stud length. Studs are sold in set lengths: check yours. |
| Stud centres | choose | Often 600 mm for internal walls and 450 mm for external walls. Your design decides. |
| Top plate | choose | Load-bearing walls often have a double top plate. Check your design. |
| Extra studs | For corners, door and window openings and wall junctions, counted by you from the plan. | |
| Extra for cuts | % |
Before you buy
- Stud centres and noggin spacing here are common defaults (Bunnings and timber suppliers cite AS 1684). Framing size, spacing and bracing for a real wall come from your design.
Frequently asked questions
How do I calculate wall framing?
Timber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres. Enter your sizes in the calculator. It works out bays (wall length ÷ stud centres, rounded up) and the later steps, then rounds up to whole packs.
Where does the framing stud spacing 450 figure come from?
450 mm. Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real spacing. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Where does the framing stud spacing 600 figure come from?
600 mm. Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real spacing. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Where does the framing noggin max gap figure come from?
1,350 mm. Bunnings how-to video: noggins at no more than 1350 mm between the top and bottom plates, with a second row for walls over 2.7 m. Check AS 1684 for your wall. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Where does the framing waste figure come from?
10 %. Editable allowance for cuts and rejected lengths. No Australian source read gives a figure: a common framing rule of thumb. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.
Does this calculator work for New Zealand?
Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.
Does it show prices?
No. It gives quantities and a shopping list. Ask your supplier for prices.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| framing stud spacing 450 | 450 mm | Editable default | Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real… |
| framing stud spacing 600 | 600 mm | Editable default | Stud centres of 450 or 600 mm (Buildamax guide citing AS 1684; Timber Central; Bunnings says 450 mm external and 600 mm internal walls). Your design sets the real… |
| framing noggin max gap | 1,350 mm | Editable default | Bunnings how-to video: noggins at no more than 1350 mm between the top and bottom plates, with a second row for walls over 2.7 m. Check AS 1684 for your wall. |
| framing waste | 10 % | Editable default | Editable allowance for cuts and rejected lengths. No Australian source read gives a figure: a common framing rule of thumb. |
Related calculators
- Concrete slabPath, patio, shed base or driveway: how much concrete you need, as bags or ready-mix, with the crushed-rock…
- Concrete for postsHow many 20 kg bags of Post Mix concrete to set posts: the hole is twice the post width and a third of the…
- Reo meshReinforcing mesh for a slab: how many sheets of SL62, SL72 or SL82 mesh, and how many bar chairs hold it off…
- BricksHow many bricks for a wall, and how many 20 kg bags of mortar mix to lay them, for a single skin or double…
- Concrete blocksHow many besser blocks for a wall, with mortar and core-fill concrete for reinforced walls.
- MortarHow many 20 kg bags of mortar mix for 1000 bricks or any number of bricks or blocks.
- PaintHow many litres of paint for a room, and which cans to buy, with doors, windows and the ceiling taken into…
- PlasterboardWalls and ceilings: how many plasterboard sheets, screws and bags of jointing compound, with cornice length.
- TilesFloor or wall tiles: how many tiles, how many boxes, bags of adhesive and grout, with waste for the layout.
- FlooringLaminate, vinyl plank or timber flooring: how many boxes to buy for a room, with waste for the layout and…
- PaversPatio or path: how many pavers, how much road base and how much bedding sand.
- Soil, gravel and mulchGarden beds, paths and driveways: cubic metres and tonnes of soil, sand, gravel, road base or mulch, with…
- TurfLawn turf rolls for a lawn, and the topsoil to lay them on, in square metres and cubic metres.
- Retaining wallConcrete sleeper retaining wall: how many sleepers and posts, and the drainage gravel behind it.
- FenceTimber paling or steel sheet fence: posts, rails, palings or panels, and bags of concrete for the post holes.
- DeckingTimber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at…
- Roofing sheetsMetal roof sheets: how many sheets of Custom Orb, Trimdek or Klip-Lok, how long they must be for the pitch…
- Weatherboard claddingFibre-cement weatherboards (Linea, Stria, HardiePlank): how many boards and packs for a wall, with the…
- Insulation battsWall or ceiling batts: how many packs of insulation batts to buy for an area, from the pack coverage.