EnoughToGet CalculatorsGuides

Concrete & masonry

Concrete blocks calculator

How many besser blocks for a wall, with mortar and core-fill concrete for reinforced walls.

Try itConcrete blocks: enter your own sizes
m
Type metres, for example 6.4.
m
m²
The thickness does not change how many blocks a square metre needs, only the core-fill and the wall.
Reinforced walls have some or all of the cores filled. Your engineer's design says which.
%
5% for a plain wall, about 10% with corners, openings and cut blocks.
You need
142 blocks
10.8 m² of 190 mm block wall

Shopping list

ItemBuyNote
Concrete blocks, 190 mm series142 blocks12.5 per m²
Mortar mix, 20 kg bags16 bagssite-mixed instead: about 0.13 m³
  • Block counts assume a 400 × 200 mm module (390 × 190 mm block and a 10 mm joint). Mortar bags follow Cement Australia (about 10 blocks to a 20 kg bag); core-fill and site-mixed mortar volumes come from calculator websites, not block makers: check with your supplier. Walls with corners, openings and many cut blocks need about 10% extra.
How this was worked out
  1. Wall area: length × height − openings
    6 × 1.8 − 0 = 10.8 m²
  2. Blocks per m²: 1 ÷ ((block length + joint) × (block height + joint))
    1 ÷ (0.4 × 0.2) = 12.5 blocks/m²
  3. Blocks needed: area × blocks per m² × (1 + waste), rounded up
    10.80 × 12.5 × 1.05 = 141.75 blocks
  4. Mortar: blocks × (1 + mortar waste) ÷ blocks per 20 kg bag, rounded up
    142 × 1.10 ÷ 10 = 15.62 bags (20 kg)

Concrete blocks needed by size

Wall (m, length × height)Main resultShopping list
4 × 1.263 block63 block Concrete blocks, 190 mm series; 7 bag Mortar mix, 20 kg bags
6 × 1.8142 block142 block Concrete blocks, 190 mm series; 16 bag Mortar mix, 20 kg bags
8 × 2.4252 block252 block Concrete blocks, 190 mm series; 28 bag Mortar mix, 20 kg bags
10 × 1.8237 block237 block Concrete blocks, 190 mm series; 27 bag Mortar mix, 20 kg bags
12 × 2.4378 block378 block Concrete blocks, 190 mm series; 42 bag Mortar mix, 20 kg bags

Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.

How it is calculated

  1. Wall area: length × height − openings
    6 × 1.8 − 0 = 10.8 m²
  2. Blocks per m²: 1 ÷ ((block length + joint) × (block height + joint))
    1 ÷ (0.4 × 0.2) = 12.5 blocks/m²
  3. Blocks needed: area × blocks per m² × (1 + waste), rounded up
    10.80 × 12.5 × 1.05 = 141.75 blocks
  4. Mortar: blocks × (1 + mortar waste) ÷ blocks per 20 kg bag, rounded up
    142 × 1.10 ÷ 10 = 15.62 bags (20 kg)

What to enter

FieldUnitHelp
Wall lengthmType metres, for example 6.4.
Wall heightm
Openings to deductm²
Block thicknesschooseThe thickness does not change how many blocks a square metre needs, only the core-fill and the wall.
Core-fill concretechooseReinforced walls have some or all of the cores filled. Your engineer's design says which.
Extra for cuts and breakage%5% for a plain wall, about 10% with corners, openings and cut blocks.

Before you buy

Frequently asked questions

How do I calculate concrete blocks?

How many besser blocks for a wall, with mortar and core-fill concrete for reinforced walls. Enter your sizes in the calculator. It works out wall area (length × height − openings) and the later steps, then rounds up to whole packs.

Where does the block length figure come from?

390 mm. Cornell Engineers (engineering consultancy): standard besser block 390 x 190 mm face, series 90, 140, 190 and 290 mm thick (AS 4455.1 modular size, 10 mm joints). This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the block height figure come from?

190 mm. Cornell Engineers (engineering consultancy): standard besser block 390 x 190 mm face. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the block joint figure come from?

10 mm. Standard 10 mm mortar joint used for the 400 x 200 mm block module (Cornell Engineers; Built Simple calculator). This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Where does the block mortar m3 per m2 figure come from?

0.012 m3/m2. Calculate.co.nz block calculator (not a manufacturer): about 0.012 to 0.015 m3 of site-mixed mortar per square metre of block wall; the low end is used. This is an editable starting value, not an official figure. Change it if your product label or supplier says otherwise.

Does this calculator work for New Zealand?

Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.

Does it show prices?

No. It gives quantities and a shopping list. Ask your supplier for prices.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
block length390 mmEditable defaultCornell Engineers (engineering consultancy): standard besser block 390 x 190 mm face, series 90, 140, 190 and 290 mm thick (AS 4455.1 modular size, 10 mm joints).
block height190 mmEditable defaultCornell Engineers (engineering consultancy): standard besser block 390 x 190 mm face.
block joint10 mmEditable defaultStandard 10 mm mortar joint used for the 400 x 200 mm block module (Cornell Engineers; Built Simple calculator).
block mortar m3 per m20.012 m3/m2Editable defaultCalculate.co.nz block calculator (not a manufacturer): about 0.012 to 0.015 m3 of site-mixed mortar per square metre of block wall; the low end is used.
block per 20kg mortar bag10 blocks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint (a calculator site says about 17: the maker figure is used).
block corefill m3 per m2 900.01 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 90 mm series 0.010 m3 of core-fill per square metre.
block corefill m3 per m2 1400.023 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 140 mm series 0.023 m3 of core-fill per square metre.
block corefill m3 per m2 1900.04 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 190 mm series 0.040 m3 of core-fill per square metre.
block corefill m3 per m2 2900.073 m3/m2Editable defaultBuilt Simple core-fill calculator (not a manufacturer): 290 mm series 0.073 m3 per square metre (the same page also quotes 0.064: check with your supplier).
block waste plain5 %Editable defaultBuilt Simple and CalcMyProject: 5% for a plain rectangular wall, up to 10% with corners and openings.
block waste complex10 %Editable defaultBuilt Simple and CalcMyProject: 10% for a wall with corners, openings and cut blocks.
mortar waste10 %Editable defaultEditable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb.

Guides for this calculator

Related calculators