Fencing & decking
Decking calculator
Timber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at the right spacing.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Decking boards, 90 mm wide, 2.4 m long | 86 boards | 39 rows of 2.0 boards, 3 mm gaps |
| Joists, 3.6 m long | 11 joists | at most 500 mm apart |
| Screws or nails (two per board per joist) | 944 fixings | check your board maker's fixing advice |
- Gap between boards: 3 mm for hardwood (ATFA). Use at least 5 mm close to the ground or over a slab. Joist spacing: no more than 500 mm for Hardwood, 19 mm (WoodSolutions).
- Bearers, posts, footings and deck height need a design to AS 1684. This calculator counts the deck surface only. Check with your council whether you need approval.
How this was worked out
- Rows of boards:
width ÷ (board width + gap), rounded up
3600 ÷ (90 + 3) = 39 rows - Boards per row:
length ÷ board length
4.8 ÷ 2.4 = 2 boards - Boards:
rows × boards per row × (1 + waste), rounded up
39 × 2.00 × 1.10 = 85.8 boards - Joists:
length ÷ joist spacing, rounded up, + 1
4800 ÷ 500 + 1 = 11 joists - Fixings:
rows × joists × fixings per crossing × (1 + waste)
39 × 11 × 2 × 1.10 = 943.8 fixings
Decking needed by size
| Deck (m) | Main result | Shopping list |
|---|---|---|
| 3 × 3 | 46 board | 46 board Decking boards, 90 mm wide, 2.4 m long; 7 joist Joists, 3 m long; 509 fixing Screws or nails (two per board per joist) |
| 3.6 × 3 | 55 board | 55 board Decking boards, 90 mm wide, 2.4 m long; 9 joist Joists, 3 m long; 654 fixing Screws or nails (two per board per joist) |
| 4.8 × 3.6 | 86 board | 86 board Decking boards, 90 mm wide, 2.4 m long; 11 joist Joists, 3.6 m long; 944 fixing Screws or nails (two per board per joist) |
| 6 × 4 | 121 board | 121 board Decking boards, 90 mm wide, 2.4 m long; 13 joist Joists, 4 m long; 1,259 fixing Screws or nails (two per board per joist) |
| 7.2 × 4.8 | 172 board | 172 board Decking boards, 90 mm wide, 2.4 m long; 16 joist Joists, 4.8 m long; 1,831 fixing Screws or nails (two per board per joist) |
Australian figures with every other setting at its default. Change them in the calculator, or switch to New Zealand.
How it is calculated
- Rows of boards:
width ÷ (board width + gap), rounded up
3600 ÷ (90 + 3) = 39 rows - Boards per row:
length ÷ board length
4.8 ÷ 2.4 = 2 boards - Boards:
rows × boards per row × (1 + waste), rounded up
39 × 2.00 × 1.10 = 85.8 boards - Joists:
length ÷ joist spacing, rounded up, + 1
4800 ÷ 500 + 1 = 11 joists - Fixings:
rows × joists × fixings per crossing × (1 + waste)
39 × 11 × 2 × 1.10 = 943.8 fixings
What to enter
| Field | Unit | Help |
|---|---|---|
| Deck length (board direction) | m | Boards run along this length. Joists run across it. |
| Deck width | m | |
| Decking type and thickness | choose | Sets the joist spacing and the gap between boards. |
| Board width | choose | Cover width of the board you will buy. |
| Board length you will buy | m | Boards meet over a joist. Use the length your supplier stocks. |
| Extra for cuts | % | Angled or patterned decks waste more. |
Before you buy
- Gap between boards: 3 mm for hardwood (ATFA). Use at least 5 mm close to the ground or over a slab. Joist spacing: no more than 500 mm for Hardwood, 19 mm (WoodSolutions).
- Bearers, posts, footings and deck height need a design to AS 1684. This calculator counts the deck surface only. Check with your council whether you need approval.
Frequently asked questions
How do I calculate decking?
Timber deck boards, joists and fixings for a deck: how many boards at the right gap, and how many joists at the right spacing. Enter your sizes in the calculator. It works out rows of boards (width ÷ (board width + gap), rounded up) and the later steps, then rounds up to whole packs.
Where does the deck gap hardwood figure come from?
3 mm. ATFA Residential Timber Decks guide: 3 mm gap for hardwood or cypress boards up to 90 mm wide, not close to the ground. Checked against its source on 2026-11-18.
Where does the deck gap softwood figure come from?
5 mm. ATFA Residential Timber Decks guide: 5 mm gap for softwood boards (and 130 mm hardwood). Use at least 5 mm close to the ground or over a slab. Checked against its source on 2026-11-18.
Where does the deck joist spacing hardwood 19 figure come from?
500 mm. WoodSolutions TDG 21 Table 2: maximum joist spacing 500 mm for 19 mm hardwood decking (AS 2796). Checked against its source on 2026-11-18.
Where does the deck joist spacing cypress 19 figure come from?
400 mm. WoodSolutions TDG 21 Table 2: maximum joist spacing 400 mm for 19 mm cypress decking (AS 1810). Checked against its source on 2026-11-18.
Does this calculator work for New Zealand?
Yes. Switch the region to New Zealand. Where New Zealand products or coverage differ, such as Resene paint coverage and GIB plasterboard sheets, the calculator uses the New Zealand figure.
Does it show prices?
No. It gives quantities and a shopping list. Ask your supplier for prices.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.
Guides for this calculator
Related calculators
- Concrete slabPath, patio, shed base or driveway: how much concrete you need, as bags or ready-mix, with the crushed-rock…
- Concrete for postsHow many 20 kg bags of Post Mix concrete to set posts: the hole is twice the post width and a third of the…
- Reo meshReinforcing mesh for a slab: how many sheets of SL62, SL72 or SL82 mesh, and how many bar chairs hold it off…
- BricksHow many bricks for a wall, and how many 20 kg bags of mortar mix to lay them, for a single skin or double…
- Concrete blocksHow many besser blocks for a wall, with mortar and core-fill concrete for reinforced walls.
- MortarHow many 20 kg bags of mortar mix for 1000 bricks or any number of bricks or blocks.
- PaintHow many litres of paint for a room, and which cans to buy, with doors, windows and the ceiling taken into…
- PlasterboardWalls and ceilings: how many plasterboard sheets, screws and bags of jointing compound, with cornice length.
- TilesFloor or wall tiles: how many tiles, how many boxes, bags of adhesive and grout, with waste for the layout.
- FlooringLaminate, vinyl plank or timber flooring: how many boxes to buy for a room, with waste for the layout and…
- PaversPatio or path: how many pavers, how much road base and how much bedding sand.
- Soil, gravel and mulchGarden beds, paths and driveways: cubic metres and tonnes of soil, sand, gravel, road base or mulch, with…
- TurfLawn turf rolls for a lawn, and the topsoil to lay them on, in square metres and cubic metres.
- Retaining wallConcrete sleeper retaining wall: how many sleepers and posts, and the drainage gravel behind it.
- FenceTimber paling or steel sheet fence: posts, rails, palings or panels, and bags of concrete for the post holes.
- Roofing sheetsMetal roof sheets: how many sheets of Custom Orb, Trimdek or Klip-Lok, how long they must be for the pitch…
- Weatherboard claddingFibre-cement weatherboards (Linea, Stria, HardiePlank): how many boards and packs for a wall, with the…
- Wall framingTimber stud wall: how many studs, how much plate and how many noggins for a wall at 450 or 600 mm centres.
- Insulation battsWall or ceiling batts: how many packs of insulation batts to buy for an area, from the pack coverage.