EnoughToGet CalculatorsGuides

Concrete & masonry

How much mortar per 1000 bricks?

By the EnoughToGet teamUpdated 2026-11-184 min readSources and assumptions

You will need 55 bags of 20 kg mortar mix to lay 1000 bricks, which accounts for approximately 605 litres of mortar including a 10% allowance for spills.

Try itMortar: enter your own sizes
Use the count from the bricks or blocks calculator, or your own.
Cement Australia: a 20 kg bag lays about 20 bricks or about 10 blocks.
%
Mortar dropped or left in the bucket.
You need
55 bags
about 605 L of mortar

Shopping list

ItemBuyNote
Mortar mix, 20 kg bags55 bags20 bricks a bag
  • Site-mixed mortar is usually 1 part cement, 1 part lime and 6 parts sand by volume (an indicative M3 mix). Use the mix your design calls for.
How this was worked out
  1. Bricks per bag: from the maker's data
    Cement Australia Mortar Mix = 20 bricks
  2. Bags: units × (1 + waste) ÷ per bag, rounded up
    1000 × 1.10 ÷ 20 = 55 bags (20 kg)

Understanding mortar volume requirements

To work out the mortar for 1000 bricks, the calculator divides the brick count by the number of bricks one bag lays, then adds an allowance for spills. According to the Cement Australia Mortar Mix data sheet, one 20 kg bag yields approximately 11 litres of mortar. When laying house bricks with a 10 mm joint, a single 20 kg bag lays about 20 bricks. The calculator applies a 10% waste allowance for spills and dropped mortar. Without this waste factor, you would need 50 bags (1000 ÷ 20), which is about 550 litres or 0.55 m³ of mortar. Adding the 10% allowance gives 55 bags. At 11 litres a bag, 55 bags is about 605 litres of mortar.

Mortar purchase quantities

The table shows the number of 20 kg bags for different brick counts, using 20 bricks per bag and a 10% waste allowance. The 10% allowance is already included in every row.

Number of BricksBags Required (20 kg)Total Mortar Volume
50028308 L
100055605 L
20001101210 L

For 500 bricks the calculation gives 27.5 bags, rounded up to 28. For 2000 bricks the same formula, 2000 × 1.10 ÷ 20, gives 110 bags.

Worked example

Here is the calculation for 1000 bricks, one step at a time.

  1. Bricks per bag. Cement Australia says one 20 kg bag lays about 20 house bricks at a 10 mm joint, so the calculator uses 20 bricks per bag.
  2. Brick count and waste. Start with 1000 bricks. The formula is units × (1 + waste) ÷ per bag, rounded up. The (1 + waste) part already includes the 10% allowance, so do not add waste a second time.
  3. Bags. 1000 × 1.10 ÷ 20 = 55 bags. This is exactly 55, so the rounding up changes nothing here.
  4. Purchase. Buy 55 bags of 20 kg mix.
  5. Litres. Cement Australia says one bag yields about 11 litres, so 55 × 11 = 605 litres of mortar.

Check your product label or supplier if your bricks or joint size differ from the 10 mm joint in the Cement Australia figure.

Quick reference table

One calculator site gives far fewer bags for masonry blocks because it assumes about 17 blocks per 20 kg bag, while the Cement Australia data sheet gives about 10 blocks per bag at a 10 mm mortar joint. The more blocks a tool assumes one bag lays, the fewer bags it gives for the same job. This guide uses the maker's figures: 20 bricks or 10 blocks per 20 kg bag. For bricks, the calculator then applies its 10% allowance for spills and dropped mortar on top of the brick figure, so 1000 bricks comes to 50 bags before the allowance and 55 bags with it. Whichever tool you use, check the yield figures against your product label or supplier before you order.

Common mistakes

  • Treating the waste allowance as fixed. The 10% waste allowance is the calculator's starting value, an editable allowance, not a manufacturer figure. No Australian manufacturer figure was found for it.
  • Adding waste twice. The formula already contains (1 + waste), so 55 bags includes the allowance. Adding another 10% to 55 counts it twice.
  • Mixing up bricks and blocks. Cement Australia says a 20 kg bag lays about 20 bricks but only about 10 masonry blocks.
  • Rounding down. For 500 bricks the working gives 27.5 bags. Rounding down to 27 leaves you below the calculated amount, so the calculator rounds up to 28.
  • Mixing units. The calculator counts bags of 20 kg and gives mortar in litres. Keep bricks, bags and litres separate when you check the sums.

What changes the answer

Three inputs change the result: the brick count, the bricks one bag lays and the waste allowance. With the calculator's starting values, 500 bricks needs 28 bags and 2000 bricks needs 110 bags. The Cement Australia figure of 20 bricks per 20 kg bag is for a 10 mm joint. Check your product label or supplier for other joint sizes. The 10% waste allowance can be edited. For site-mixed mortar, The Brick Pit (citing Cement Australia and Think Brick) gives a mix of 1 cement : 1 lime : 6 sand by volume, which is indicative only. Use the mix your design calls for.

Frequently asked questions

How much mortar does one 20 kg bag yield?

One 20 kg bag of Cement Australia Mortar Mix yields approximately 11 litres of mortar.

How many bricks can I lay with one 20 kg bag?

According to the Cement Australia data sheet, one 20 kg bag lays about 20 house bricks when using a 10 mm joint.

Why does the calculator suggest 55 bags for 1000 bricks?

The calculator uses the formula 1000 × 1.10 ÷ 20, which includes a 10% allowance for spills and dropped mortar. Without the allowance, the figure is 50 bags.

Can I use the same calculation for masonry blocks?

No, the yield is different. One 20 kg bag lays approximately 10 masonry blocks at a 10 mm mortar joint.

What is the ratio for site-mixed mortar?

An indicative M3 mortar mix is 1 part cement, 1 part lime and 6 parts sand by volume, though you should use the mix your design calls for.

Sources and assumptions

These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.

SettingValueStatusSource
mortar bricks per 20kg bag20 bricks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 20 house bricks at a 10 mm joint.
mortar litres per 20kg bag11 L/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag yields about 11 litres of mortar.
block per 20kg mortar bag10 blocks/bagVerified 2026-11-18Cement Australia Mortar Mix data sheet: one 20 kg bag lays about 10 masonry blocks at a 10 mm mortar joint (a calculator site says about 17: the maker figure is used).
mortar waste10 %Editable defaultEditable allowance for spills and mortar dropped. No Australian manufacturer figure found: a common bricklaying rule of thumb.
mortar sand cement ratio m36 parts sand per 1 cementEditable defaultThe Brick Pit (citing Cement Australia and Think Brick): common M3 mortar mix is 1 cement : 1 lime : 6 sand by volume. Indicative only.