Concrete & masonry
How much concrete for a fence post?
For one 100 mm wide, 2.4 m long post, the calculator gives 3 bags of 20 kg Post Mix, or about 2.4 bags for the hole.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Post Mix concrete, 20 kg bags | 3 bags | 24 L a hole |
- Bunnings Easy Mix Post Mix: dig the hole twice the post width and one third of the post length deep, and plan on about 2 bags of 20 kg a hole for a typical post. A round hole needs less than a square one; a wider or deeper hole needs more.
- Post Mix is a different product from slab concrete: its 20 kg bag yields 0.01 m³. Do not use these bag counts for a slab.
How this was worked out
- Hole width:
post width × width factor
100 × 2 = 200 mm - Hole depth:
post length × depth fraction
2.4 × 33.3% = 799.2 mm - Concrete per hole:
hole² × depth − post² × depth
0.200² × 0.799 − 0.100² × 0.799 = 0.02 m³ - Bags:
holes × concrete per hole ÷ yield per bag, rounded up
0.024 ÷ 0.01 = 2.4 bags
How the calculator works it out
The calculator uses the post width and length to work out the hole dimensions. For a 100 mm wide post, it multiplies the width by 2, giving a 200 mm hole. Bunnings Easy Mix Post Mix technical data sheet gives this width factor. For a 2.4 m post, the calculator multiplies the length by 33.3%, giving a depth of 799.2 mm; the same sheet gives the depth fraction.
The calculator then works out concrete per hole using "hole² × depth − post² × depth". Its per-hole result is 0.02 m³. For the bag calculation, it multiplies the number of holes by the concrete per hole and divides by the 20 kg bag yield of 0.01 m³. Bunnings Easy Mix Post Mix Concrete technical data sheet gives that yield, where 100 bags make 1.0 m³. The result is 2.4 bags for one hole, before the purchase quantity is rounded up.
What changes the answer
Post width and post length affect the hole dimensions: the calculator uses twice the post width and 33.3% of the post length for depth. A wider hole or a deeper hole needs more concrete, and the calculator's volume formula subtracts the post volume from the hole volume. A round hole needs less concrete than a square one, while a wider or deeper hole needs more.
The number of holes also changes the total bag calculation. The calculator uses the number of holes multiplied by concrete per hole, divided by the yield per bag. In the results below, the post dimensions remain 100 mm wide and 2.4 m long, so the hole width and depth are the same in each row. The number of posts changes from 1 to 10, and the purchase quantity changes from 3 to 24 bags.
Quick reference table
| Posts | Hole width | Hole depth | Concrete per hole | Bags (working) | Bags to buy |
|---|---|---|---|---|---|
| 1 | 200 mm | 799.2 mm | 0.02 m³ | 2.4 | 3 |
| 10 | 200 mm | 799.2 mm | 0.02 m³ | 23.98 | 24 |
These results are for Post Mix, not slab concrete. The 20 kg Post Mix bag yield used by the calculator is 0.01 m³. Bunnings Easy Mix Post Mix technical data sheet says to use approximately two 20 kg bags per post hole; the calculator's examples give working amounts of 2.4 bags per hole. Because purchase quantities are rounded up, the one-post result is 3 bags and the ten-post result is 24 bags.
Worked example
Start with the first example: 1 post, 100 mm wide and 2.4 m long. The width calculation is "post width × width factor": 100 × 2 gives a 200 mm hole. The depth calculation is "post length × depth fraction": 2.4 × 33.3% gives a depth of 799.2 mm.
Next, the volume calculation is "hole² × depth − post² × depth": 0.200² × 0.799 − 0.100² × 0.799. The calculator gives 0.02 m³ per hole. For bags, its working is "holes × concrete per hole ÷ yield per bag, rounded up": 0.024 ÷ 0.01, giving 2.4 bags. The working figures therefore lead to a purchase quantity of 3 bags of 20 kg Post Mix. The bag formula contains no waste multiplier; it divides by the yield per bag and rounds up.
Common mistakes
Do not use the Post Mix bag yield as though it were a slab-concrete yield: the calculator uses 0.01 m³ per 20 kg Post Mix bag, and these bag counts are for post holes. Do not treat the working amount of 2.4 bags as the purchase quantity for one hole; the calculator rounds that amount up to 3 bags.
For a run of posts, the calculator rounds the total, not each hole: 10 posts give 23.98 bags, which rounds up to 24 bags rather than 10 × 3 = 30 bags.
Keep the units in the volume calculation consistent with its working figures: the dimensions used there are 0.200, 0.100 and 0.799, and the resulting volume is in m³. The hole dimensions are separately given as 200 mm and 799.2 mm. Also, do not assume a round hole uses the same concrete as a square hole; the calculator's note says a round hole needs less. A separate waste percentage is not part of the bag formula, which divides by yield and rounds up.
Frequently asked questions
How much concrete do I need for one fence post hole?
For a 100 mm wide, 2.4 m long post, allow for 3 bags of 20 kg Post Mix according to the calculator; its working amount is 2.4 bags.
How deep should the post hole be?
For a 2.4 m post, the calculator gives a depth of 799.2 mm using 33.3% of the post length.
How wide should the post hole be?
For a 100 mm wide post, the calculator gives a hole width of 200 mm using twice the post width.
How many bags do I need for 10 posts?
For 10 posts with the same dimensions, the calculator gives 24 bags of 20 kg Post Mix, from a working amount of 23.98 bags.
Can I use these bag counts for a slab?
No. These counts use the Post Mix yield of 0.01 m³ per 20 kg bag and apply to post holes, not slab concrete.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.
| Setting | Value | Status | Source |
|---|---|---|---|
| concrete post hole width factor | 2 x post width | Verified 2026-11-18 | Bunnings Easy Mix Post Mix technical data sheet: hole width = 2 x width or diameter of the post. |
| concrete post hole depth fraction | 33.3 % of post length | Verified 2026-11-18 | Bunnings Easy Mix Post Mix technical data sheet: hole depth = 1/3 of the length of the post. |
| concrete bag yield 20kg | 0.01 m3 | Verified 2026-11-18 | Bunnings Easy Mix Post Mix Concrete technical data sheet: 1 x 20 kg bag = 0.01 m3 (100 bags = 1.0 m3). |
| concrete post bags per hole | 2 bags (20 kg) | Verified 2026-11-18 | Bunnings Easy Mix Post Mix technical data sheet: use approximately two 20 kg bags per post hole. |