Concrete & masonry
How many bricks for a 6 m wall?
A single skin wall 6 m long and 2.4 m high takes 719 bricks and 40 bags of 20 kg mortar mix; the same wall at 1.8 m takes 539 bricks and 30 bags, and at 3 m it takes 899 bricks and 50 bags.
Shopping list
| Item | Buy | Note |
|---|---|---|
| Bricks | 719 bricks | 48.4 per m² per skin |
| Mortar mix, 20 kg bags | 40 bags | about 440 L of mortar |
- Bricks per m² is worked out for 230 × 76 mm bricks with 10 mm joints (about 48.5 per m², Littlehampton Brick). Other brick sizes need other numbers: check your brick's data sheet.
- Mortar: Cement Australia says a 20 kg bag of Mortar Mix lays about 20 bricks. Other calculators quote far fewer bags, so check your own mortar bag.
How this was worked out
- Wall area:
length × height − openings
6 × 2.4 − 0 = 14.4 m² - Bricks per m²:
1 ÷ ((brick length + joint) × (brick height + joint))
1 ÷ (0.24 × 0.086) = 48.45 bricks/m² - Bricks needed:
area × bricks per m² × skins × (1 + waste), rounded up
14.40 × 48.45 × 1 × 1.03 = 718.6 bricks - Mortar mix:
bricks × (1 + mortar waste) ÷ bricks per bag, rounded up
719 × 1.10 ÷ 20 = 39.55 bags (20 kg)
How the calculator works out the brick count
The wall area comes first: length × height − openings, so 6 × 2.4 with no openings gives 14.4 m². Bricks per square metre comes from the brick size plus the joint: 1 ÷ ((brick length + joint) × (brick height + joint)), which is 1 ÷ (0.24 × 0.086) = 48.45 bricks/m². Littlehampton Brick gives the Australian clay brick work size as 230 × 110 × 76 mm with 10 mm mortar joints and quotes 48.5 bricks per square metre including mortar. Bricks needed is area × bricks per m² × skins × (1 + waste): 14.40 × 48.45 × 1 × 1.03 = 718.6, rounded up to 719. The 1.03 is the calculator's starting waste value and already includes a 3% allowance, so nothing further is added for waste. Skins is 1 here because the wall is single skin.
What changes the answer
Height moves the area and the count together. At 1.8 m the wall is 10.8 m² and needs 539 bricks; at 2.4 m it is 14.4 m² and 719 bricks; at 3 m it is 18.0 m² and 899 bricks. Brick size and joint size set the 48.45 bricks/m² figure — it holds for 230 × 76 mm bricks with 10 mm joints, and other sizes need other numbers, so check your brick's data sheet. The waste allowance starts at 3%; Littlehampton Brick notes that other sources suggest 5 to 10% for cuts and breakage, so change it when a job has many cuts. An opening is subtracted from length × height before the multiplication. This guide covers a single skin, so skins stays at 1.
Bricks and mortar for a 6 m wall
The table shows the calculator's output for a 6 m single skin wall with no openings, 230 × 76 mm bricks, 10 mm joints, 3% brick waste and 10% mortar waste.
| Wall height | Wall area | Bricks | Mortar mix, 20 kg bags |
|---|---|---|---|
| 1.8 m | 10.8 m² | 539 | 30 |
| 2.4 m | 14.4 m² | 719 | 40 |
| 3.0 m | 18.0 m² | 899 | 50 |
Each extra 0.6 m of height adds 3.6 m² of wall, and the brick count rises by 180 bricks from 1.8 m to 2.4 m and by another 180 from 2.4 m to 3 m. Bricks per square metre stays 48.45 in every row, because the brick size and joint do not change. The bag count steps by 10 each time: 30, 40 and 50.
Worked example
Take the 6 m × 2.4 m wall. Step one is the area: 6 × 2.4 − 0 = 14.4 m². Step two is bricks per square metre: 1 ÷ (0.24 × 0.086) = 48.45 bricks/m². Step three is the brick count: 14.40 × 48.45 × 1 × 1.03 = 718.6, rounded up to 719. The 1.03 in that formula is the waste allowance and is already inside the 718.6, so 719 is a finished figure with waste included — do not add 3% on top. Step four is mortar: 719 × 1.10 ÷ 20 = 39.55 bags, rounded up to 40; the 1.10 adds 10% mortar waste. The shopping list is therefore 719 bricks and 40 bags of 20 kg mortar mix.
Where the mortar bags come from
Cement Australia says one 20 kg bag of Mortar Mix lays about 20 house bricks at a 10 mm joint, and that a bag yields about 11 litres of mortar. The calculator divides the brick count plus mortar waste by that 20-brick figure: 719 × 1.10 ÷ 20 = 39.55, rounded up to 40 bags. The 10% covers spills and mortar dropped, and it is the calculator's editable starting allowance. The same arithmetic gives 539 × 1.10 ÷ 20 = 29.65, rounded up to 30 bags at 1.8 m, and 899 × 1.10 ÷ 20 = 49.45, rounded up to 50 bags at 3 m. Other calculators quote far fewer bags for the same wall, so check your own mortar bag.
Common mistakes
The 3% is easy to add twice: 718.6 already contains it through the 1.03 factor, so multiplying 719 by 1.03 again overstates the order. Littlehampton Brick's 50 bricks per square metre already includes 3% wastage, so that figure should not have waste added a second time either. Rounding 718.6 down to 718 leaves you short of the calculator's purchase figure; it rounds up to 719, 539 and 899. Keep the bricks-per-square-metre formula in metres: 0.24 and 0.086, not 240 and 86. Openings are subtracted from length × height before the 48.45 multiplier, and the walls here have none. Finally, 48.45 bricks/m² belongs to 230 × 76 mm bricks with 10 mm joints; a different brick size needs its own number.
Frequently asked questions
How many bricks are in a 6 m wall 2.4 m high?
719 bricks, with 40 bags of 20 kg mortar mix for a single skin with no openings.
Does the 719 already include waste?
Yes. The 1.03 factor carries the 3% allowance, so the figure is ready to order as it stands.
Why does the mortar come to 40 bags?
Because the count is 719 × 1.10 ÷ 20 = 39.55, rounded up, using Cement Australia's figure of about 20 bricks per 20 kg bag at a 10 mm joint.
How many bricks per square metre?
48.45 for 230 × 76 mm bricks with 10 mm joints. Littlehampton Brick quotes 48.5 including mortar and 50 once 3% wastage is added.
What if the wall has a window or door?
Subtract the opening from length × height first, then multiply by 48.45 and by 1.03. None of the walls above has an opening.
Sources and assumptions
These are the settings behind every number above. Verified figures link to a source. Editable defaults are common rules of thumb: change them to match your product and your site.